Over the last few centuries, European hand Custom embroidery patches designs have been considered to be one of the best ways to which you can add an impressive touch to your hats and bags. It is your choice that whether you want to add your names on the back side of your cap or at the front side. Latest technologies have given the people with the complete freedom through which they can carry out the use of various font styles and designs for the hand embroidery designing in the hats with their names. Do you want to know how is it possible?
Easy StepsĀ Do European Hand Embroidery Designs With Names on Hats:
Step No 1: Firstly you should start by drawing the name of the design which you want to embroider out on top of the piece of paper. Make sure that the letters of the name must be thick so that they are clear visible at the time when you are stitching it on the hats. Now firmly hold the hat just as against the template that will be used to centre your design.
Step No 2: Now in the next step, you will be cutting the portion of the embroidery so that you can cover the inside part of the hat at the behind side. If you want the design to stick permanent on the hat, then you can even iron it on low heat. Now you will be carrying out the embroidery all the way through the hat and the backing.
Step No 3: Moving to the next you will be placing the portion of the hat in the company of the name on top of it by using the embroidery hoop. If you think that you are not able to find the best circle location, then you can even firmly hold the clothing taut by the way of using your fingers as you start off with the stitching.
Step No 4: You should be threading the needle by the way of using almost three portions of the embroidery floss. Don’t forget to tie the knot at the end of the part in the European hand embroidered badges designs. Now locate the needle straight away into the top or even at the bottom left portion of the conception. It is the point where your stitching will start off!
Step No 5: You should carefully stitch the letters by the usage of floss. You should mark the line so that you can follow the line while sewing the first letter of the name. You should be carrying out with the horizontal stitches until and unless the whole letter is not finished. Keep the stitches tight while pulling. But wait! Don’t pull them too much otherwise the fabric will tear off.
Step No 6: As you have stitched the first letter of the name, you will continue to sew the rest of the letters as well. If your thread gets a finish in the middle of the stitching, then make sure that you knot the thread at that point before using the second wire or thread epigoantion.
Through these six straightforward and easy steps, you can amazingly finish the European hand embroidery designs on the hats with your name. So what are you thinking? Try it now!